Pro Controller 6 Multi 4G

The PROLED PRO CONTROLLERS 6 MULTI 4G are used together with a switching power supply are used as a 6-channel power supply for all PROLED products. With the PROLED PRO CONTROLLER 6 MULTI 4G fantastic colour mixings and colour changes can be achieved for the PROLED products (by automatic programs or DMX, DALI or 1-10 V control). Any fixed colour can as well be selected and dimmed. With the RGB spectra 16,7 million colour combinations are possible. The automatic programs can be changed by RDM with the PC-DMX/RDM INTERFACE and the associated software (included with the PC-DMX/RDM INTERFACE). With RDM also the configuration of the PRO CONTROLLERS is possible. By using the IR or RF receiver all programs can be controlled with the IR receiver or RF receiver / RF receiver 2G. Two versions are available: CA (common anode – common plus) and CC (common cathode – common minus). The PROLED PRO CONTROLLER 6 MULTI 4G can also be used as 6-channel dimmer for the monochrome PROLED products.

• 6 channels
• Input 2x 15 A (12 V: 2x 180 Watt, 24 V: 2x 360 Watt) – parallel, only same voltage possible
• Output 6x 5 A = 30 A. 12 V: 360 Watt (6x 60 Watt), 24 V: 720 Watt (6x 120 Watt)
• Power range 12–24 V
• MULTI input: DMX 512, DALI, 1-10 V controllable
• DMX 512 8-bit and 16-bit (for 16-bit two DMX channels per channel required)
• Remote controllable per RDM by using the PC-DMX/RDM INTERFACE and the software
• IR or RF remote controllable by using the IR INTERFACE or RF INTERFACE / RF RECEIVER 2G
• 9 integrated stand alone programs (changeable with the PC-DMX/RDM INTERFACE)
• Each program with speed adjustment from 0,05 sec to 30 min
• Each colour manually selectable and dimmable
• A colour can be saved as default colour, that is automatically set after restarting the device
• The PWM frequency is selectable in steps from 76 to19500 Hz.
• adjustable output characteristic (Gamma, minimum value, maximum value)
• Overheat protection
• Master – Slave operation possible
• Graphic LCD display and four operating buttons
• Mountable at wall or ceiling and also for DIN RAIL mounting
• In combination with INGROUND 1 and INGROUND 3 only possible from INGROUND version L171....Y.