Flex Strip HD+ RGB 2,5 m

Flex Strip HD+ RGB 2,5 m

The PROLED FLEX STRIPS are perfect for indirect lighting, as custom made versions for fair or shop applications as well as for all kinds of illumination. Due to their shallow design and the individually adaptable lengths the PROLED FLEX STRIPS offer a wide spectrum of application possibilities.

  • 3 colours in one LED, therefore 100% smooth colour mixing.
  • High flexibility – adaptable to round shapes.
  • Installation with 3M adhesive tape on the strip’s backside (self adhesive).
  • dimmable, autom. colour change, controllable via DMX 512, DALI, KNX, 1-10 V, CASAMBI, RF by MULTI power supplies/controller

Technical Data

IP classification

IP20

Power source

24 VDC Common Anode (CA)

Electrical connection

2x cable with 4-PIN to open wires

Maximum quantity per power input

2,5 m

Average lifetime*

50.000 h at L80/B10

Operating temperature range

-10° C till +45° C

Width x height

12 x 2,5 mm

min. Bending radius

20 mm

Cuttable

all 6 LEDs (5 cm)

*With correct installation and a suitable thermal management.

Photometric Data

LED type

SMD RGB 3-in-1 LEDs

Luminous flux

red 330 Lumen per m

green 880 Lumen per m

blue 200 Lumen per m

r+g+b (white) 1400 Lumen per m

Wave length

red 620 nm

green 525 nm

blue 470 nm

Beam angle

120°

Due to conditions of production photometric data can vary from production batch to production batch within the EU directive.

Product Types

Are you

a lighting designer, an electrical designer or an architect?

And you need information on lighting values, technical planning, installation situations or have questions about suitable lamps?

Just ask us